SS22L Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 2.0 AMPS. Surface Mount Schottky Barrier Rectifiers

Preliminary
SS22L THRU SS210L
2.0 AMPS. Surface Mount Schottky Barrier Rectifiers
Features
Voltage Range
20 to 100 Volts
Current
2.0 Amperes
Sub SMA
— For surface mounted application
— Low –PROFILE PACKAGE
— Ideal for automated placement
— Low power loss, high efficiency
— High temperature soldering:
260^oC / 10 seconds at terminals
Mechanical Data
— Cases: Sub SMA plastic case
— Polarity: Color band denotes cathode end
— Packaging: 12mm tape per EIA STD RS-481
— Weight approx. 15mg
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Marking Code (Note 4)
Symbo SS SS SS SS SS SS SS Units
l 22L 23L 24L 25L 26L 29L 210L
V_RRM ^{20 30 40 50 60 90 100 V}
V_RMS ^{14 21 28 35 42 63 70 V}
V_DC ^{20 30 40 50 60 90 100 V}
22LYM 23LYM 24LYM 25LYM 26LYM 29LYM 210LYM
Maximum Average Forward Rectified Current
at T_L(See Fig. 1)
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
(Note 1) @ 2.0A
Maximum DC Reverse Current @ T_A =25℃ at
Rated DC Blocking Voltage @ T_A=100℃
I_(AV)
I_FSM
V_F
I_R
2.0
50
0.5
0.70
0.4
20
10.0
A
A
0.85
V
0.1
mA
20
mA
Typical Junction Capacitance (Note 3)
Cj
130
pF
Typical Thermal Resistance ( Note 2 )
R θJL
17
℃/W
R θJA
75
℃/W
Operating Temperature Range
T_J
-65 to +125
-65 to +150
℃
Storage Temperature Range
TSTG
-65 to +150
℃
Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle
2. Measured on P.C.Board with 0.27 x 0.27”(7.0 x 7.0mm) Copper Pad Areas.
3. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C.
4. 22LYM: 2=2A, 2-20V, L-Low Profile, Y-Year Code, M-Month Code.
12.31.2004/ rev. A