SS22 Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SS22 THRU SS210
Features
2.0 AMPS. Surface Mount Schottky Barrier Rectifiers
Voltage Range
20 to 100 Volts
Current
2.0 Amperes
SMB/DO-214AA
For surface mounted application
Metal to silicon rectifier, majority carrier conduction
Low forward voltage drop
Easy pick and place
High surge current capability
Plastic material used carriers Underwriters
Laboratory Classification 94V-0
Epitaxial construction
High temperature soldering:
260^oC / 10 seconds at terminals
.082(2.08)
.076(1.93)
.147(3.73)
.137(3.48)
.187(4.75)
.167(4.25)
.012(.31)
.006(.15)
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packaging: 12mm tape per EIA STD RS-481
Weight: 0.093gram
.103(2.61)
.078(1.99)
.056(1.41)
.035(0.90)
.008(.20)
.004(.10)
.208(5.28)
.200(5.08)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol SS SS SS SS SS SS SS Units
22 23 24 25 26 29 210
Maximum Recurrent Peak Reverse Voltage V_RRM 20 30 40 50 60 90 100 V
Maximum RMS Voltage
VRMS 14 21 28 35 42 63 70 V
Maximum DC Blocking Voltage
VDC 20 30 40 50 60 90 100 V
Maximum Average Forward Rectified Current
at T_L(See Fig. 1)
I(AV)
2.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
50
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
(Note 1) @ 2.0A
VF
0.5
0.70
0.85
V
Maximum DC Reverse Current @ TA =25℃
at Rated DC Blocking Voltage @ TA=100℃
IR
0.4
20
10.0
0.1
mA
20
mA
Typical Junction Capacitance (Note 3)
Cj
130
Typical Thermal Resistance ( Note 2 )
RθJL
17
RθJA
75
Operating Temperature Range
TJ
-65 to +125
-65 to +150
Storage Temperature Range
TSTG
-65 to +150
Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle
2. Measured on P.C.Board with 0.4 x 0.4”(10 x 10mm) Copper Pad Areas.
3. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C.
pF
℃/W
℃/W
℃
℃
- 54 -