SRA820 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 8.0 AMPS. Schottky Barrier Rectifiers

SRA820 THRU SRA8200
8.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
20 to 200 Volts
Current
8.0 Amperes
Features
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: TO-220A molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260^OC/10 seconds/.25”,(6.35mm) from
case
Weight: 2.24 grams
.113(2.87)
.103(2.62)
TO-220A
.412(10.5)
MAX
DIA
.154(3.91)
.148(3.74)
.27(6.86)
.23(5.84)
.594(15.1)
.587(14.9)
.185(4.70)
.175(4.44)
.055(1.40)
.045(1.14)
PIN1
2
.16(4.06)
.14(3.56)
.037(0.94)
.027(0.68)
.56(14.22)
.53(13.46)
.11(2.79)
.10(2.54)
.205(5.20)
.195(4.95)
.025(0.64)
.014(0.35)
PIN 1
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{SRA SRA SRA SRA SRA SRA SRA SRA} Units
820 830 840 850 860 890 8100 8200
Maximum Recurrent Peak Reverse Voltage
VRRM 20 30 40 50 60 90 100 200 V
Maximum RMS Voltage
VRMS 14 21 28 35 42 63 70 140 V
Maximum DC Blocking Voltage
VDC 20 30 40 50 60 90 100 200 V
Maximum Average Forward Rectified Current
See Fig. 1
I(AV)
8.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load ^IFSM
150
A
(JEDEC method )
Maximum Instantaneous Forward Voltage @8.0A V_F
Maximum D.C. Reverse Current @ Tc=25℃
at Rated DC Blocking Voltage @ Tc=100℃
IR
0.55
0.70
0.92 1.05 V
0.5
0.009 mA
50
10 mA
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Junction Temperature Range
Storage Temperature Range
RθJC
Cj
TJ
TSTG
4.0
400
300
250
-65 to +125
-65 to +150
-65 to +150
℃/W
pF
℃
℃
Notes: 1. Thermal Resistance from Junction to Case Per Leg with Heat sink (2”x3”x0.25”) Al-plate.
2. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C.
- 116 -