SR1020 Datasheet, PDF (1/2 Pages) Bytes – 10.0 AMP SCHOTTKY BARRIER RECTIFIERS

SR1020 THRU SR1060
Features
10.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
20 to 60 Volts
Current
10.0 Amperes
TO-220
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: TO-220 molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-
STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260^OC/10 seconds/ .25”,(6.35mm) from
case.
Weight: 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol SR SR SR SR SR Units
1020 1030 1040 1050 1060
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
V
Maximum RMS Voltage
VRMS
14
21
28
35
42
V
Maximum DC Blocking Voltage
VDC
20
30
40
50
60
V
Maximum Average Forward Rectified Current
See Fig. 1
I(AV)
10.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
175
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@5.0A
VF
0.55
0.70
V
Maximum D.C. Reverse Current @ Tc=25℃
at Rated DC Blocking Voltage @ Tc=100℃
IR
0.5
mA
50
mA
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
RθJC
Cj
3.0
℃/W
310
pF
Operating Junction Temperature Range
Storage Temperature Range
TJ
TSTG
-65 to +125
-65 to +150
℃
-65 to +150
℃
Notes: 1. Thermal Resistance from Junction to Case Per Leg, Mounted on Heatsink size of 2 in x 3 in x
0.25 in Al-Plate.
2. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C.
- 140 -