English
Language : 

SMCJ_11 Datasheet, PDF (1/5 Pages) Taiwan Semiconductor Company, Ltd – 1500 Watts Suface Mount Transient Voltage Suppressor
CREAT BY ART
Pb
RoHS
COMPLIANCE
SMCJ SERIES
1500 Watts Suface Mount Transient Voltage Suppressor
SMC/DO-214AB
Features
— UL Recognized File # E-326243
— For surface mounted application
— Low profile package
— Built-in strain relief
— Glass passivated junction
— Excellent clamping capability
— Fast response time: Typically less than 1.0ps from
0 volt to BV min
— Typical IR less than 1uA above 10V
— High temperature soldering guaranteed:
260℃ / 10 seconds at terminals
— Plastic material used carried Underwriters
Laboratory Flammability Classification 94V-0
— 1500 watts peak pulse power capability with a
10/1000 us waveform
— Green compound with suffix "G" on packing
code & prefix "G" on datecode
Mechanical Data
— Case: Molded plastic
— Terminals: Pure tin plated, lead free
— Polarity: Indicated by cathode band
— Standard packaging: 16mm tape per EIA Std RS-481
— Weight: 0.26 gram
Maximum Ratings and Electrical Characteristics
Rating at 25 ℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Dimensions in inches and (millimeters)
Marking Diagram
GXX = Specific Device Code
G
= Green Compound
Y
= Year
M
= Work Month
Type Number
Symbol
Value
Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1)
PPK
Steady State Power Dissipation
PD
Peak Forward Surge Current, 8.3ms Single Half
Sine-wave Superimposed on Rated Load
IFSM
(JEDEC method)(Note 2, 3) - Unidirectional Only
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
VF
Minimum 1500
5
200
3.5 / 5.0
Typical Thermal Resistance
RθJC
RθJA
10
55
Operating and Storage Temperature Range
TJ, TSTG
Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25℃ Per Fig. 2
Note 2: Mounted on 16mm x 16mm Copper Pads to Each Terminal
-55 to +150
Note 3: 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum
Note 4: VF=3.5V on SMCJ5.0 thru SMCJ90 Devices and VF=5.0V on SMCJ100 thru SMCJ170 Devices
Unit
Watts
Watts
Amps
Volts
℃/W
℃
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMCJ5.0 through Types SMCJ170
2. Electrical Characterstics Apply in Both Directions
Version:G11