SMAJ_13 Datasheet, PDF (1/7 Pages) Taiwan Semiconductor Company, Ltd – 400 Watts Suface Mount Transient Voltage Suppressor

creat by art
Features
— For surface mounted application
— Low profile package
— Built-in strain relief
— Glass passivated junction
— Excellent clamping capability
— Fast response time: Typically less than 1.0ps from
0 volt to BV min
— Typical I_R less than 1uA above 10V
— High temperature soldering guaranteed:
260℃ / 10 seconds at terminals
— Plastic material used carried Underwriters
Laboratory Flammability Classification 94V-0
— 400 watts peak pulse power capability with a 10 /
1000 us waveform (300W above 78V)
— Green compound with suffix "G" on packing
code & prefix "G" on datecode
Mechanical Data
— Case: Molded plastic
— Terminals: Pure tin plated, lead free
— Polarity: Indicated by cathode band
— Packaging: 12mm tape per EIA Std RS-481
— Weight: 0.064 gram
Ordering Information (example)
SMAJ SERIES
400 Watts Suface Mount Transient Voltage Suppressor
SMA/DO-214AC
Part No. Package
Packing
Packing
code
Packing code
(Green)
SMAJ5.0 SMA 1.8K / 7" REEL
R3
R3G
Maximum Ratings and Electrical Characteristics
Rating at 25 ℃ ambient temperature unless otherwise specified.
Type Number
Symbol
Peak Power Dissipation at T_A=25℃, Tp=1ms(Note 1)
P_PK
Steady State Power Dissipation
P_D
Peak Forward Surge Current, 8.3ms Single Half
Sine-wave Superimposed on Rated Load
I_FSM
(JEDEC method) (Note 2)
Maximum Instantaneous Forward Voltage at 25.0A for
Unidirectional Only
V_F
Operating and Storage Temperature Range
T_J, T_STG
Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above T_A=25℃ Per Fig. 2
Note 2: Mounted on 5 x 5mm Copper Pads to Each Terminal
Value
400
1
40
3.5
-55 to +150
Unit
Watts
Watts
Amps
Volts
℃
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMAJ5.0 through Types SMAJ188
2. Electrical Characterstics Apply in Both Directions
Version:I13