SFA1601G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 16.0 AMPS. Glass Passivated Super Fast Rectifiers

SFA1601G THRU SFA1608G
16.0 AMPS. Glass Passivated Super Fast Rectifiers
Features
Voltage Range
50 to 600 Volts
Current
16.0 Amperes
TO-220A
.185(4.70)
.175(4.44)
Low forward voltage drop
High current capability
High reliability
High surge current capability
.113(2.87)
.103(2.62)
.412(10.5)
MAX
DIA
.154(3.91)
.148(3.74)
.27(6.86)
.23(5.84)
.594(15.1)
.587(14.9)
.055(1.40)
.045(1.14)
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-
STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260^oC/10 seconds .16”,(4.06mm) from
case.
Weight: 2.24 grams
PIN1
2
.16(4.06)
.14(3.56)
.037(0.94)
.027(0.68)
.56(14.22)
.53(13.46)
.11(2.79)
.10(2.54)
.205(5.20)
.195(4.95)
.025(0.64)
.014(0.35)
PIN 1
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{SFA SFA SFA SFA SFA SFA SFA SFA} Units
1601G 1602G 1603G 1604G 1605G 1606G 1607G 1608G
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V
Maximum RMS Voltage
V_RMS 35 70 105 140 210 280 350 420 V
Maximum DC Blocking Voltage
VDC 50 100 150 200 300 400 500 600 V
Maximum Average Forward Rectified
Current @TC = 100℃
I_(AV)
16.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
200
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 16.0A
VF
0.975
1.3
1.7
V
Maximum DC Reverse Current
@ TA=25℃ at Rated DC Blocking Voltage
IR
@ TA=100℃
10
uA
400
uA
Maximum Reverse Recovery Time (Note 1) Trr
35
nS
Typical Junction Capacitance (Note 2)
Cj
130
100
pF
Typical Thermal Resistance (Note 3)
RθJC
1.0
Operating Temperature Range
TJ
-65 to +150
Storage Temperature Range
TSTG
-65 to +150
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Mounted on Heatsink. Size of 3 in x 5 in x 0.25 in Al-Plate.
℃/W
℃
℃
- 276 -