SF801G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 8.0 AMPS. Glass Passivated Super Fast Rectifiers

SF801G THRU SF808G
Features
8.0 AMPS. Glass Passivated Super Fast Rectifiers
Voltage Range
50 to 600 Volts
Current
8.0 Amperes
TO-220
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Case: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260^oC/10 seconds .16”,(4.06mm) from
case.
Weight: 2.24 grams
PIN 1
PIN 3
CASE
PIN 2
Positive CT
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol SF SF SF SF SF SF SF SF Units
801G 802G 803G 804G 805G 806G 807G 808G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 150 200 300 400 500 600 V
Maximum RMS Voltage
VRMS 35 70 105 140 210 280 350 420 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375 (9.5mm) Lead Length
@TC = 100℃
VDC 50 100 150 200 300 400 500 600 V
I(AV)
8.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
125
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 4.0A
VF
0.975
1.3
1.7
V
Maximum DC Reverse Current
@ TA=25℃ at Rated DC Blocking Voltage
IR
@ TA=100℃
10.0
uA
400
uA
Maximum Reverse Recovery Tim (Note 1) Trr
35
nS
Typical Junction Capacitance (Note 2)
Cj
70
50
pF
Typical Thermal Resistance (Note 3)
RθJC
3.0
℃/W
Operating Temperature Range
TJ
-65 to +150
℃
Storage Temperature Range
TSTG
-65 to +150
℃
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Thermal Resistance from Junction to Case Mounted on Heatsink. Size of 2 in x 3 in
x 0.25 in, Al-Plate.
- 260 -