SF2001PT Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 20.0 AMPS. Glass Passivated Super Fast Rectifiers

SF2001PT THRU SF2008PT
Features
20.0 AMPS. Glass Passivated Super Fast Rectifiers
Voltage Range
50 to 600 Volts
Current
20.0 Amperes
TO-3P/TO-247AD
Dual rectifier construction, positive center-tap
Plastic package has Underwriters Laboratory Flammability
Classifications 94V-0
Glass passivated chip junctions
Superfast recovery time, high voltage
Low forward voltage, high current capability
Low thermal resistance
Low power loss, high efficiency
High temperature soldering guaranteed:
260^oC / 10 seconds, 0.16”(4.06mm) lead lengths at 5 lbs.,
(2.3kg) tesion
Mechanical Data
Cases: JEDEC TO-3P/TO-247AD molded plastic
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting position: Any
Weight: 0.2 ounce, 5.6 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
TYPE NUMBER
Symbol SF SF SF SF SF SF SF SF Units
2001 2002 2003 2004 2005 2006 2007 2008
PT PT PT PT PT PT PT PT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
V_RRM 50 100 150 200 300 400 500 600 V
V_RMS 35 70 105 140 210 280 350 420 V
Maximum DC Blocking Voltage
V_DC 50 100 150 200 300 400 500 600 V
Maximum Average Forward Rectified Current
at Tc=100℃
I(AV)
20
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
Maximum Instantaneous Forward Voltage @10.0A
@20A
Maximum D.C. Reverse Current at Rated DC
Blocking Voltage
@ Tc=25℃
@ Tc=100℃
IFSM
VF
IR
280
A
0.95
1.3
1.7
0.21
V
10
uA
400
Maximum Reverse Recovery Time (Note 2) TJ=25℃ _Trr
35
nS
Typical Junction Capacitance (Note 1)
Cj
175
pF
Typical Thermal Resistance (Note 3)
RθJC
2.5
℃/W
Operating Junction Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Recover to 0.25A.
3. Thermal Resistance from Junction to Case Mounted on Heatsink size 3”x5”x0.25” Al-Plate.
- 292 -