SF1601PT_1 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 16.0 AMPS. Glass Passivated Super Fast Rectifiers

SF1601PT THRU SF1606PT
Features
16.0 AMPS. Glass Passivated Super Fast Rectifiers
Voltage Range
50 to 400 Volts
Current
16.0 Amperes
TO-3P/TO-247AD
Dual rectifier construction, positive center-tap
Plastic package has Underwriters Laboratory Flammability
Classifications 94V-0
Glass passivated chip junctions
Superfast recovery time, high voltage
Low forward voltage, high current capability
Low thermal resistance
Low power loss, high efficiency
High temperature soldering guaranteed:
260^oC / 10 seconds, 0.16”(4.06mm) lead lengths at 5 lbs.,
(2.3kg) tesion
Mechanical Data
Cases: JEDEC TO-3P/TO-247AD molded plastic
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting position: Any
Weight: 0.2 ounce, 5.6 grams
PIN 1
PIN 3
PIN 2
Positive CT
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^SF
SF
SF
1601PT 1602PT 1603PT
SF
SF
SF
1604PT 1605PT 1606PT
Units
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 150 200 300 400
V
Maximum RMS Voltage
V_RMS 35 70 105 140 210 280 V
Maximum DC Blocking Voltage
V_DC 50 100 150 200 300 400 V
Maximum Average Forward Rectified Current
at Tc=100℃
I_(AV)
16
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load I_FSM
200
A
(JEDEC method )
Maximum Instantaneous Forward Voltage @8.0A
VF
0.95
1.3
V
Maximum D.C. Reverse Current @ Tc=25℃
IR
at Rated DC Blocking Voltage
@ Tc=100℃
10.0
uA
500
uA
Maximum Reverse Recovery Time(Note 2) TJ=25℃
Trr
35
nS
Typical Junction Capacitance (Note 1)
Cj
85.0
pF
Typical Thermal Resistance (Note 3)
RθJC
2
Operating Junction Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Recover to 0.25A.
3. Mounted on Heatsink. Size of 3” x 5” x 0.25” Al-Plate.
℃/W
℃
℃
- 286 -