SF1004G-Q1 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 10.0 AMPS. Glass Passivated Super Fast Rectifiers

SF1004G-Q1
Features
10.0 AMPS. Glass Passivated Super Fast Rectifiers
Voltage Range
200 Volts
Current
10.0 Amperes
TO-220
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Case: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260^oC/10 seconds .16”,(4.06mm) from
case.
Weight: 2.24 grams
PIN 1
PIN 3
CASE
PIN 2
Positive CT
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
SF1004G-Q1
Units
Maximum Recurrent Peak Reverse Voltage
V_RRM
200
V
Maximum RMS Voltage
V_RMS
140
V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375 (9.5mm) Lead Length @TC = 100℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
V_DC
I_(AV)
IFSM
200
V
10.0
A
125
A
Maximum Instantaneous Forward Voltage
@ 5.0A
VF
@10.0A
1.1
V
1.25
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=100℃
IR
10.0
uA
500
uA
Reverse Recovery Charge(Per Diode)
@IF=2A, VR≧30V,-dIF/dt=20A/uS
QS
9
NC
Thermal Resistance Junction to Case (Note 3)
Rating for Fusing (t < 8.3mS)
RθJC
I²t
3.0
℃/W
65
A²S
Maximum Reverse Recovery Time (Note 1)
Trr
25
nS
Typical Junction Capacitance (Note 2)
Cj
10
pF
Operating Temperature Range
TJ
-50 to +150
℃
Storage Temperature Range
TSTG
-50 to +150
℃
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Thermal Resistance from Junction to Case Mounted on Heatsink. Size of 2 in x 3 in
x 0.25 in, Al-Plate.
- 268 -