SA_13 Datasheet, PDF (1/7 Pages) Taiwan Semiconductor Company, Ltd – 500 Watts Transient Voltage Suppressor

CREAT BY ART
SA SERIES
500 Watts Transient Voltage Suppressor
DO-15
Features
— Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
— 500W surge capability at 10 X 1000us
waveform
— Excellent clamping capability
— Low Dynamic impedance
— Fast response time: Typically less than 1.0ps from
0 volts to VBR for unidirectional and 5.0 ns
for bidirectional
— Typical I_R less than 1uA above 10V
— High temperature soldering guaranteed:
260℃ / 10 seconds / .375",(9.5mm) lead length /
5lbs., (2.3kg) tension
— Green compound with suffix "G" on packing
code & prefix "G" on datecode
Mechanical Data
— Case: Molded plastic
— Lead: Pure tin plated lead free, solderable per
MIL-STD-202, Method 208
— Polarity: Color band denotes cathode except bipolar
— Weight: 0.354 grams
Ordering Information (example)
Part No. Package
Packing
INNER
TAPE
Packing code
SA5.0 DO-15 1.5K / AMMO box
52mm
A0
Maximum Ratings and Electrical Characteristics
Rating at 25 ℃ ambient temperature unless otherwise specified.
Parameter
Symbol
Peak Power Dissipation at T_A=25℃, Tp=1ms (Note 1)
P_PK
Steady State Power Dissipation at T_L=75℃
Lead Lengths .375", 9.5mm (Note 2)
P_D
Peak Forward Surge Current, 8.3ms Single Half
Sine-wave Superimposed on Rated Load
I_FSM
(JEDEC method) (Note 3)
Maximum Instantaneous Forward Voltage at 35 A for
Unidirectional Only
Operating and Storage Temperature Range
V_F
T_J, T_STG
Packing code
(Green)
A0G
Value
Minimum 500
3
70
3.5
-55 to +175
Note:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above T_A=25℃ Per Fig. 2.
2. Mounted on Copper Pad Area of 0.4 x 0.4" (10 x 10mm) Per Fig. 2.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SA5.0 through Types SA170.
2. Electrical Characterstics Apply in Both Directions.
Units
Watts
Watts
Amps
Volts
℃
Version:G13