S6A Datasheet, PDF (1/2 Pages) Micro Commercial Components – 6 Amp Silicon Rectifier 50 to 1000 Volts

S6A THRU S6M
Features
6.0 AMPS. Surface Mount Rectifiers
Voltage Range
50 to 1000 Volts
Current
6.0Amperes
SMC / DO-214AB
For surface mounted application
Glass passivated junction chip.
Low forward voltage drop
High current capability
Easy pick and place
High surge current capability
Plastic material used carries Underwriters
Laboratory Classification 94V-O
High temperature soldering:
260^oC / 10 seconds at terminals
.129(3.27)
.118(3.0)
.245(6.22)
.220(5.59)
.280(7.11)
.260(6.60)
.012(.31)
.006(.15)
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packaging: 16mm tape per EIA STD RS-481
Weight: 0.21 gram
.103(2.62)
.079(2.00)
.060(1.52)
.030(0.76)
.008(.20)
.004(.10)
.320(8.13)
.305(7.75)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol S6A S6B S6D S6G S6J
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600
Maximum RMS Voltage
V_RMS 35 70 140 280 420
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600
Maximum Average Forward Rectified
Current .375 (9.5mm) Lead Length
I_(AV)
6.0
@TL = 75℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
I_FSM
250
Maximum Instantaneous Forward Voltage
@ 6.0A
V_F
1.15
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=100℃
I_R
10
400
Typical Junction Capacitance ( Note 1 )
Cj
100
Typical Thermal Resistance ( Note 2 )
RθJA
10
Operating Temperature Range
TJ
-65 to +125
Storage Temperature Range
TSTG
-65 to +150
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
2. Measured on P.C. Board with 0.6 x 0.6” (16 x 16mm) Copper Pad Areas.
S6K
800
560
800
S6M
1000
700
1000
Units
V
V
V
A
A
V
uA
uA
pF
℃/W
℃
℃
- 492 -