S2AA Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT GLASS PASSIVATED RECTIFIER

S2AA THRU S2MA
Features
1.5 AMPS. Surface Mount Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.5 Amperes
SMA/DO-214AC
For surface mounted application
Glass passivated junction chip.
Low forward voltage drop
High current capability
Easy pick and place
High surge current capability
Plastic material used carries Underwriters
Laboratory Classification 94V-O
High temperature soldering:
260^oC / 10 seconds at terminals
.062(1.58)
.050(1.27)
.111(2.83)
.090(2.29)
.187(4.75)
.160(4.06)
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packaging: 12mm tape per EIA STD RS-481
Weight: 0.064 gram
.091(2.30)
.078(1.99)
.056(1.41)
.035(0.90)
.008(.20)
.004(.10)
.210(5.33)
.195(4.95)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol S2AA S2BA S2DA S2GA S2JA S2KA S2MA Units
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current @TL =100^OC
I(AV)
1.5
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
50
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.5A
VF
1.1
V
Maximum DC Reverse Current
@ TA =25^OC at Rated DC Blocking Voltage
I_R
@ TA=125^OC
5.0
uA
125
uA
Typical Thermal Resistance (Note 3)
RθJL
RθJA
16
53
O_C/W
Maximum Reverse Recovery Time
( Note 1 )
Trr
2.0
uS
Typical Junction Capacitance ( Note 2 )
Cj
30
pF
Operating Temperature Range
TJ
-55 to +150
O_C
Storage Temperature Range
TSTG
-55 to +150
O_C
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied VR=4.0 Volts
3. Measured on P.C. Board with 0.2 x 0.2” (5.0 x 5.0mm) Copper Pad Areas.
- 496 -