S1A_1 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER

S1A - S1M
1.0 AMP. Surface Mount Rectifiers
SMA/DO-214AC
Features
For surface mounted application
Glass passivated junction chip.
Low forward voltage drop
High current capability
Easy pick and place
High surge current capability
Plastic material used carries Underwriters
Laboratory Classification 94V-0
High temperature soldering:
260^oC / 10 seconds at terminals
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated, lead free.
Polarity: Indicated by cathode band
Packaging: 12mm tape per EIA STD RS-481
Weight: 0.064 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol S1A S1B S1D S1G S1J
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current @TL =110 ^oC
V_RRM
V_RMS
V_DC
I_(AV)
50 100 200 400 600
35 70 140 280 420
50 100 200 400 600
1.0
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
30
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
V_F
1.1
Maximum DC Reverse Current @ TA =25 ^oC
at Rated DC Blocking Voltage @ TA=125 ^oC
I_R
1.0
50
Maximum Reverse Recovery Time (Note 1) Trr
1.8
Typical Junction Capacitance ( Note 2 )
Cj
12
Typical Thermal Resistance (Note 3)
Operating Temperature Range
Storage Temperature Range
R_θJL
R_θJA
TJ
TSTG
27
75
-55 to +150
-55 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied VR=4.0 Volts
3. Measured on P.C. Board with 0.2” x 0.2” (5.0mm x 5.0mm) Copper Pad Areas.
S1K S1M
800 1000
560 700
800 1000
30
85
Units
V
V
V
A
A
V
uA
uA
uS
pF
o_C/W
o_C
o_C
- 456 -
Version: C07