S1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

S1A THRU S1M
1.0 AMP. Surface Mount Rectifiers
Features
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
SMA/DO-214AC
For surface mounted application
Glass passivated junction chip.
Low forward voltage drop
High current capability
Easy pick and place
High surge current capability
Plastic material used carries Underwriters
Laboratory Classification 94V-O
High temperature soldering:
260^oC / 10 seconds at terminals
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packaging: 12mm tape per EIA STD RS-481
Weight: 0.064 gram
.062(1.58)
.050(1.27)
.111(2.83)
.090(2.29)
.187(4.75)
.160(4.06)
.091(2.30)
.078(1.99)
.056(1.41)
.035(0.90)
.008(.20)
.004(.10)
.210(5.33)
.195(4.95)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol _{S1A S1B S1D S1G S1J S1K S1M Units}
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TL =110℃
I(AV)
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
30
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
1.1
V
Maximum DC Reverse Current @ TA =25℃
at Rated DC Blocking Voltage @ TA=125℃
IR
5
uA
50
uA
Typical Thermal Resistance (Note 3)
RθJL
27
RθJA
75
30
85
℃/W
Maximum Reverse Recovery Time ( Note 1 ) Trr
1.8
uS
Typical Junction Capacitance ( Note 2 )
Cj
12
pF
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied V_R=4.0 Volts
3.Measured on P.C. Board with 0.2 x 0.2” (5.0 x 5.0mm) Copper Pad Areas.
- 482 -