RS1AL Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 0.8 AMP. Surface Mount Fast Recovery Rectifiers

RS1AL - RS1ML
0.8 AMP. Surface Mount Fast Recovery Rectifiers
Sub SMA
Features
For surface mounted application
Glass passivated junction chip
Built-in strain relief, ideal for automated
placement
Plastic material used carries Underwriters
Laboratory Classification 94V-0
Fast switching for high efficiency
High temperature soldering:
260^oC/ 10 seconds at terminals
Mechanical Data
Cases: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packing: 8mm / 12mm tape per EIA STD
RS-481
Weight: 15 mg
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol RS RS RS RS RS RS RS Units
1AL 1BL 1DL 1GL 1JL 1KL 1ML
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Marking Code (Note 1)
V_DC 50 100 200 400 600 800 1000 V
RALYM RBLYM RDLYM RGLYM RJLYM RKLYM RMLYM
Maximum Average Forward Rectified Current
See Fig. 1 @TL=90^oC
I_(AV)
0.8
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
I_FSM
30
A
Maximum Instantaneous Forward Voltage
@ 1.0A
V_F
1.3
V
Maximum DC Reverse Current @ TA =25 ^OC
at Rated DC Blocking Voltage @ TA=125 ^OC
I_R
5
uA
50
uA
Maximum Reverse Recovery Time ( Note 2 )
Typical Junction Capacitance ( Note 3 )
T_RR
Cj
150
250
500
nS
10
pF
Typical Thermal Resistance (Note 4)
R _θJA
R _θJL
105
32
Operating Temperature Range
T_J
-55 to +150
Storage Temperature Range
T_STG
-55 to +150
Notes: 1. RALYM: R=1.0A, A=50V, L-Low Profile, Y-Year Code, M-Month Code.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
3. Measured at 1 MHz and Applied VR=4.0 Volts
4. Mounted on P.C.B. with 0.2” x 0.2” ( 5 mm x 5 mm ) Copper Pad Areas.
o_{C /W}
o_C
o_C
- 356 -
Version: B07