RGP15A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER

RGP15A THRU RGP15M
Features
1.5 AMPS. Glass Passivated Junction Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.5 Amperes
DO-15
High temperature metallurgically bonded constructed
Plastic material used carries Underwriters Laboratory
Classification 94V-0
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
1.5 amperes operation at TA=50^oC with no thermal runaway
Typical IR less than 0.1 uA
High temperature soldering guaranteed:
350℃/10seconds/.375”(9.5mm) lead length at 5 lbs.,
2.3 kg tension
Mechanical Data
Cases: JEDEC DO-15 molded plastic over glass body
Lead: Plated Axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting position: Any
Weight: 0.015 ounce, 0.4 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol RGP RGP RGP RGP RGP
15A 15B 15D 15G 15J
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600
Maximum RMS Voltage
V_RMS 35 70 140 280 420
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375” (9.5mm) Lead Length @TA = 55℃
V_DC 50 100 200 400 600
I_(AV)
1.5
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
method )
I_FSM
50.0
Maximum Instantaneous Forward Voltage @ 1.5A
Maximum Full Load Reverse Current, Full Cycle
Average 0.375”(9.3mm) Lead Length at TA=55^oC
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=150℃
V_F
HT_IR
I_R
1.3
100
5.0
200
Maximum Reverse Recovery Time ( Note 1 )
Trr
150
250
Typical Junction Capacitance ( Note 2 )
Cj
15
Typical Thermal Resistance (Note 3)
RθJA
60
Operating and Storage Temperature Range
TJ ,TSTG
-65 to + 175
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHz and Applied VR=4.0 Volts
3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.
RGP RGP _Units
15K 15M
800 1000 V
560 700 V
800 1000 V
A
A
V
uA
uA
uA
500
nS
pF
℃/W
℃
- 576 -