RGP10A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER

RGP10A THRU RGP10M
Features
1.0 AMP. Glass Passivated Junction Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
DO-41
High temperature metallurgically bonded constructed
Plastic material used carries Underwriters Laboratory
Classification 94V-0
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
1.0 ampere operation at TA=55^oC with no thermal runaway
Typical IR less than 0.1 uA
High temperature soldering guaranteed:
350^oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs.,
(2.3kg) tension
Fast switching for high efficiency
Mechanical Data
Case: JEDEC DO-41 molded plastic over glass body
Lead: Plated Axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting position: Any
Weight: 0.012 ounce, 0.3 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol RGP RGP RGP RGP RGP RGP RGP _Units
10A 10B 10D 10G 10J 10K 10M
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375” (9.5mm) Lead Length
I(AV)
1.0
A
@ TA = 55℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
30.0
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
1.3
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=150℃
IR
5.0
uA
200
uA
Maximum Reverse Recovery Time ( Note 1 )
TJ=25℃
Trr
150
250 500
nS
Typical Junction Capacitance ( Note 2 )
Cj
15
pF
Typical Thermal Resistance (Note 3)
RθJA
65
℃/W
Operating Temperature Range
TJ
-65 to + 175
℃
Storage Temperature Range
TSTG
-65 to + 175
℃
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A Recover to 0.25A.
2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts.
3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
- 574 -