P6SMB_11 Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – 600 Watts Suface Mount Transient Voltage Suppressor

creat by art
Pb
RoHS
COMPLIANCE
P6SMB SERIES
600 Watts Suface Mount Transient Voltage Suppressor
SMB/DO-214AA
Features
— UL Recognized File # E-326243
— For surface mounted application in order to optimize
board space
— Low profile package
— Built-in strain relief
— Glass passivated junction
— Excellent clamping capability
— Fast response time: Typically less than 1.0ps from
0 volt to BV min
— Typical I_R less than 1uA above 10V
— High temperature soldering guaranteed:
260℃ / 10 seconds at terminals
— Plastic material used carried Underwriters
Laboratory Flammability Classification 94V-0
— 600 watts peak pulse power capability with a 10 /
1000 us waveform
— Green compound with suffix "G" on packing
code & prefix "G" on datecode
Mechanical Data
— Case: Molded plastic
— Terminals: Pure tin plated, lead free
— Polarity: Indicated by cathode band
— Packaging: 12mm tape per EIA Std RS-481
— Weight: 0.093 gram
Dimensions in inches and (millimeters)
Marking Diagram
XXX = Specific Device Code
G
= Green Compound
Y
= Year
M
= Work Month
Maximum Ratings and Electrical Characteristics
Rating at 25 ℃ ambient temperature unless otherwise specified.
Type Number
Symbol
Peak Power Dissipation at T_A=25℃, Tp=1ms(Note 1)
P_PK
Steady State Power Dissipation
P_D
Peak Forward Surge Current, 8.3ms Single Half
Sine-wave Superimposed on Rated Load
I_FSM
(JEDEC method)(Note 2, 3) - Unidirectional Only
Value
Minimum 600
3
100
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
V_F
3.5 / 5.0
Typical Thermal Resistance
R_θJC
R_θJA
10
55
Operating and Storage Temperature Range
T_J, T_STG
Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above T _A=25℃ Per Fig. 2
Note 2: Mounted on 10 x 10mm (.035mm Think) Copper Pads to Each Terminal
-65 to +150
Note 3: 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum
Note 4: V_F=3.5V on P6SMB6.8 thru P6SMB91 Devices and V _F=5.0V on P6SMB100 thru P6SMB220 Device.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types P6SMB6.8 through Types P6SMB220A
2. Electrical Characterstics Apply in Both Directions
Version:E11
Unit
Watts
Watts
Amps
Volts
℃/W
℃