P600A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – HIGH CURRENT PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes)

P600A THRU P600M
Features
6.0 AMPS Silicon Rectifiers
Voltage Range
50 to 1000 Volts
Current
6.0 Amperes
P600
Plastic material used carries
Underwriters Laboratory Classification
94V-0
High forward current capability
High surge current capability
High temperature soldering guaranteed:
260^oC/10 seconds, 0.375”(9.5mm) lead
length, 5lbs. (2.3kg) tension
Mechanical Data
Cases: Molded plastic
Lead: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode
end
Mounting position: Any
Weight: 0.07 ounce, 2.1 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol P600A P600B P600D P600G P600J P600K P600M _Units
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000 ^V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 ^V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at
TA=60^oC, 0.375”(9.5mm) Lead Length (Fig 1)
TL=60℃, 0.125”(3.1mm) Lead Length (Fig 2)
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
6.0
A
22.0
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC _IFSM
400.0
A
method )
Maximum Instantaneous Forward Voltage @6.0A
@100A
V_F
1.0
1.3
1.4 ^V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=100℃
I_R
5.0
uA
1.0
mA
Typical Junction Capacitance ( Note 1 )
Cj
110
pF
Typical Thermal Resistance (Note 2)
RθJA
RθJL
Operating Junction and Storage Temperature
Range
TJ, TSTG
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C.
2. Mount on Cu-Pad Size 16mm x 16mm on P.C.B.
35
5.0
-50 to + 150
℃/W
℃
- 524 -