MBRF1035CT Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Dual Schottky Rectifiers

MBRF1035CT - MBRF10150CT
Isolated 10.0 AMPS. Schottky Barrier Rectifiers
ITO-220AB
Features
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: ITO-220AB molded plastic
Terminals: Pure tin plated, lead free. solderable per
MIL-STD-750, Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{MBRF MBRF MBRF MBRF MBRF MBRF MBRF} Units
1035 1045 1050 1060 1090 10100 10150
CT CT CT CT CT CT CT
Maximum Recurrent Peak Reverse Voltage VRRM 35
45
50
60
90 100 150
V
Maximum RMS Voltage
VRMS
24
31
35
42
63
70 105
V
Maximum DC Blocking Voltage
VDC
35
45 50 60 90 100 150
V
Maximum Average Forward Rectified Current
at TC=133^oC
I(AV)
10
A
Peak Repetitive Forward
Square Wave, 20KHz) at
Current (Rated
Tc=133^oC
VR,
IFRM
10.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
120
A
Load (JEDEC method )
Peak Repetitive Reverse Surge Current
(Note 1)
IRRM
0.5
A
Maximum Instantaneous Forward Voltage at
(Note 2)
IIII_FFFF====115500AAAA,,,,TTTTcccc====122125525^o_5o^Co_CoCC
VF
Maximum Instantaneous Reverse Current
at Rated DC Blocking Voltage @Tc=25 ^oC
@ Tc=125 ^oC
IR
0.70
0.57
0.80
0.67
0.80
0.65
0.90
0.75
0.1
15
10
0.85
0.75
0.95
0.85
0.88
0.78
V
0.98
0.88
0.1
mA
5.0
mA
Voltage Rate of Change, (Rated VR)
RMS Isolation Voltage (t=1.0 second, R.H.
≦30%, TA=25 ^oC)
(Note 4)
(Note 5)
dV/dt
VISO
10,000
4500
3500
V/uS
V
(Note 6)
Typical Thermal Resistance Per Leg (Note3)
Operating Junction Temperature Range
Storage Temperature Range
R_θJC
TJ
TSTG
1500
3.5
-65 to +150
-65 to +150
o_C/W
o_C
o_C
Notes:
1. 2.0 us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg.
4. Clip Mounting (on case), where lead does not overlap heatsink with 0.110” offset.
5. Clip mounting (on case), where leads do overlap heatsink.
6. Screw mounting with 4-40 screw, where washer diameter is ≦^<= 4.9 mm (0.19”)
- 116 -
Version: B07