MBR4035PT Datasheet, PDF (1/2 Pages) General Semiconductor – SCHOTTKY RECTIFIER

MBR4035PT THRU MBR40100PT
Features
40.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
35 to 100 Volts
Current
40.0 Amperes
TO-3P/TO-247AD
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon rectifier, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.17”(4.3mm)from case
Mechanical Data
Cases: JEDEC TO-3P/TO-247AD molded plastic body
Terminals: Leads solderable per MIL-STD-750, Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 10 in. - lbs. max
Weight: 0.2 ounce, 5.6 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol MBR MBR MBR MBR MBR MBR
4035 4045 4050 4060 4090 40100
PT PT PT PT PT PT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Tc=125^OC
VRRM
VRMS
VDC
I(AV)
35
45
50
60
90 100
24
31
35
42
63
70
35
45
50
60
90 100
40
Peak Repetitive Forward Current (Rated VR, Square
Wave, 20KHz) at Tc=120^oC
IFRM
40
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
method )
Peak Repetitive Reverse Surge Current (Note 1)
Maximum Instantaneous Forward Voltage at (Note 2)
IF=20A, Tc=25^OC
IF=20A, Tc=125^OC
IF=40A, Tc=25^OC
IF=40A, Tc=125^OC
Maximum Instantaneous Reverse Current
@ Tc=25℃ at Rated DC Blocking Voltage Per Leg
@ Tc=125℃ (Note 1)
IFSM
IRRM
VF
IR
2.0
0.70
0.60
0.80
0.75
400
1.0
0.72
0.62
–
–
0.84
0.74
–
–
1.0
100.0
Voltage Rate of Change at (Rated VR)
Typical Thermal Resistance Per Leg (Note 3)
dV/dt
RθJC
10,000
1,000
1.2
Operating Junction Temperature Range
TJ
Storage Temperature Range
TSTG
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg
-65 to +150
-65 to +175
Units
V
V
V
A
A
A
A
V
mA
mA
V/uS
℃/W
℃
℃
- 202 -