MBR2535CT Datasheet, PDF (1/2 Pages) Motorola, Inc – SWITCHMODE™ Power Rectifiers

MBR2535CT THRU MBR25100CT
Features
25.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
35 to 100 Volts
Current
25.0 Amperes
TO-220
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: JEDEC TO-220 molded plastic
Terminals: Leads solderable per MIL-STD-750, Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{MBR25 MBR25 MBR25 MBR25 MBR25 MBR25} Units
35CT 45CT 50CT 60CT 90CT 100CT
Maximum Recurrent Peak Reverse Voltage
VRRM
35 45 50 60 90 100 V
Maximum RMS Voltage
VRMS
24 31 35 42 63 70
V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at
TC=130^oC
Peak Repetitive Forward Current (Rated VR, Square
Wave, 20KHz) at Tc=130^oC
VDC
I(AV)
IFRM
35 45 50 60 90 100 V
25
A
25
A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
method )
IFSM
200
A
Peak Repetitive Reverse Surge Current (Note 1)
IRRM
1.0
0.5
A
Maximum Instantaneous Forward Voltage at (Note 2)
IF=12.5A, Tc=25^OC
IF=12.5A, Tc=125^OC
VF
IF=25A, Tc=25^OC
IF=25A, Tc=125^OC
-
-
0.82
0.73
0.75
0.65
-
-
Maximum Instantaneous Reverse Current @ Tc=25℃
0.2
0.2
at Rated DC Blocking Voltage Per Leg @ Tc=125℃
IR
40.0
50
(Note 2)
Voltage Rate of Change, (Rated VR)
Maximum Thermal Resistance Per Leg (Note 3)
dV/dt
RθJC
1,000
1.0
Typical Junction Capacitance
Cj
600
460
Operating Junction Temperature Range
TJ
-65 to +150
Storage Temperature Range
TSTG
-65 to +175
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg, with Heatsink size (4”x6”x0.25”) Al-Plate.
0.85
0.75
-
-
V
mA
mA
V/uS
℃/W
pF
℃
℃
- 190 -