MBR20L100CT Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 20.0 AMP. Schottky Barrier Rectifiers

Pb RoHS
COMPLIANCE
MBR20L100CT
20.0 AMP. Schottky Barrier Rectifiers
TO-220AB
Features
Low power loss, high efficiency.
High current capability, Low forward voltage drop.
Plastic material used carries Underwriters Laboratory
Classifications UL 94V-0
High surge current capability.
Guard-ring for transient protection.
For use in low voltage, high frequency inventor, free
wheeling, and polarity protection application.
High temperature soldering guaranteed: 260oC/10 seconds
/.375”,(9.5mm) lead lengths at 5 lbs., (2.3kg) tension
Mechanical Data
Cases: JEDEC TO-220AB Molded plastic
Terminal: Pure tin plated, lead free, solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: As marked
Mounting position : Any
Mounting Torque : 5 in-lbs. max.
Weight: 2.24 gram
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Dimensions in inches and (millimeters)
Type Number
Symbol
MBR20L1000CT
Units
Maximum Recurrent Peak Reverse Voltage
V_RRM
100
V
Maximum RMS Voltage
V_RMS
70
V
Maximum DC Blocking Voltage
V_DC
100
V
Maximum Average Forward Rectified Current .375 (9.5mm)
Lead Length @TC = 120℃
I_(AV)
20
A
Peak Repetitive Forward Current (Rated VR, Square Wave,
20KHz) At TC = 130℃
I_FRM
20
A
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method )
I_FSM
220
A
Peak Repetitive Reverse surge Current (Note 1)
Maximum Instantaneous Forward Voltage at (Note 2)
IF=10A TC =25 ℃
IF=10A TC =125 ℃
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@ TA=25 ℃
@ TA=100 ℃
Voltage rate of change (rated VR)
I_RRM
V_F
I_R
dV/dt
1.0
0.77
0.67
0.2
10
10,000
A
V
mA
V/uS
Typical Junction Capacitance (Note 2)
Cj
460
pF
Typical Thermal Resistance per leg.(Note 3)
RθJC
Operating Temperature Range
T_J
Storage Temperature Range
T_STG
Notes: 1. 2.0Us PU;SE WIDTH. F=1.0kh, Continue 10 cycles
1.0
-65 to +150
-65 to +175
O_C/W
O_C
O_C
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Thermal Resistance from junction to case Per Leg, with Heatsink size (4"x6"x0.25") Al-plate.
Page : 1 of 2
Version : C09