MBR1030CT Datasheet, PDF (1/2 Pages) Diodes Incorporated – 10A SCHOTTKY BARRIER RECTIFIER

MBR1030CT THRU MBR10200CT
Features
10.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
30 to 200 Volts
Current
10.0 Amperes
TO-220
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: JEDEC TO-220A molded plastic body
Terminals: Lead solderable per MIL-STD-750, Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{MBR MBR MBR MBR MBR MBR MBR MBR MBR} Units
1030 1035 1040 1045 1050 1060 1010 1015 1020
CT CT CT CT CT CT 0CT 0CT 0CT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Tc=125^OC
VRRM
VRMS
VDC
I(AV)
30 35 40 45 50 60 100 150 200 V
21 24 28 31 35 42 70 105 140 V
30 35 40 45 50 60 100 150 200 V
10
A
Peak Repetitive Forward Current (Rated VR,
Square Wave, 20KHz) at Tc=125^oC
IFRM
32
A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method )
Peak Repetitive Reverse Surge Current (Note 1)
Maximum Instantaneous Forward Voltage at:
(Note 2)
IF=5A, TC=25^oC
IF=5A, TC=125^oC
Maximum Instantaneous Reverse Current
@ Tc =25℃ at Rated DC Blocking Voltage
(Note 2)
IFSM
IRRM
VF
IR
0.70
0.57
0.1
120
0.5
0.80
0.65
A
A
0.85 0.88 0.99 V
0.75 0.78 0.87
0.8 0.2 mA
Voltage Rate of Change (Rated VR)
dV/dt
10,000
V/uS
Maximum Typical Thermal Resistance (Note 3) Rθ_JC
1.5
℃/W
Operating Junction Temperature Range
TJ
-65 to +150
℃
Storage Temperature Range
TSTG
-65 to +175
℃
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg, Mount on Heatsink Size of 2 in x 3 in x 0.25in Al-Plate.
- 128 -