MBR10100CT Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 10 Amp HT Power Schottky Barrier Rectifier 100 Volts to 200Volts

MBR10100CT THRU MBR10200CT
Features
10.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
100 to 200 Volts
Current
10.0 Amperes
TO-220
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: JEDEC TO-220 molded plastic body
Terminals: Lead solderable per MIL-STD-750, Method
2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
MBR
MBR
10100CT 10150CT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Tc=125^OC
Peak Repetitive Forward Current (Rated VR, Square
Wave, 20KHz) at Tc=125^oC
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
method )
Peak Repetitive Reverse Surge Current (Note 1)
Maximum Instantaneous Forward Voltage at:
(Note 2)
IF=5A, TC=25^oC
IF=5A, TC=125^oC
Maximum Instantaneous Reverse Current@ Tc =25℃
at Rated DC Blocking Voltage (Note 2)
VRRM
VRMS
VDC
I(AV)
IFRM
IFSM
IRRM
VF
IR
100
150
70
105
100
150
10
32.0
120
0.5
0.85
0.88
0.75
0.78
0.008
MBR
10200CT
200
140
200
Units
V
V
V
A
A
A
A
0.99
0.87
V
0.2
mA
Voltage Rate of Change (Rated VR)
dV/dt
10,000
V/uS
Maximum Typical Thermal Resistance (Note 3)
RθJc
1.5
℃/W
Operating Junction Temperature Range
TJ
-65 to +150
℃
Storage Temperature Range
TSTG
-65 to +175
℃
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg, Mount on Heatsink Size of 2 in x 3 in x 0.25 in Al-Plate.
- 90 -