KBU1001 Datasheet, PDF (1/2 Pages) Kwang Myoung I.S. CO.,LTD – 10 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

KBU1001 THRU KBU1007
Single Phase 10 AMPS. Silicon Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
10.0 Amperes
Features
UL Recognized File # E-96005
High surge current capability
Ideal for printed circuit board
Reliable low cost construction technique
results in inexpensive product
.160(4.1)
.140(3.6)
.70(17.8)
.66(16.8)
.760(19.3)
MAX
KBU
.935(23.7)
.895(22.7)
.185(4.7)
.165(4.2) _.280(7.1)
.260(6.6)
.085(2.2)
45⁰
.065(1.7)
.455(11.3)
.405(10.3)
High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
Weight: 8 grams
1.0(25.4)
MIN
.220(5.6)
.180(4.6)
.260(6.8)
.180(4.5)
.165(4.2)
.150(3.8)
.052(1.3)
.048(1.2)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol KBU KBU KBU KBU KBU KBU KBU _Units
1001 1002 1003 1004 1005 1006 1007
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@TA = 55℃
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
10.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
300
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 10A
V_F
1.1
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=100℃
I_R
10
uA
500
uA
Typical Thermal Resistance (Note)
Rθ_JC
2.2
℃/W
Operating Temperature Range
TJ
-55 to +125
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: Thermal Resistance from Junction to Case with Device Mounted on 2” x 3” x 0.25” Al-Plate.
- 688 -