KBP301G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers

KBP301G THRU KBP307G
Features
Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
3.0 Amperes
KBP
UL Recognized File # E-96005
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction technique
results in inexpensive product
High temperature soldering guaranteed:
260 ℃ / 10 seconds at 5 lbs. ( 2.3 Kg )
tension
Small size, simple installation
Leads solderable per MIL-STD-202,
Method 208
.460(11.68)
.420(10.6)
.035(0.9)
.028(0.7)
AC
.5 (12.7)
MIN
.160(4.1)
.140(3.6)
SPACING
.600(15.24)
.560(14.22)
.153(3.9)
.146(3.7)
.050(1.27)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol KBP KBP KBP KBP KBP KBP KBP _Units
301G 302G 303G 304G 305G 306G 307G
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@TA = 50℃
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
3.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
80
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 3.0A
V_F
1.1
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃
I_R
10
uA
500
uA
Typical Thermal Resistance (Note)
RθJA
RθJL
30
11
℃/W
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note : Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on PCB
With 0.4” x 0.4” (10mm x 10mm) Copper Pads.
- 722 -