KBP201G Datasheet, PDF (1/2 Pages) Surge Components – Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers

KBP201G THRU KBP207G
Features
Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
2.0 Amperes
KBP
UL Recognized File # E-96005
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction technique
results in inexpensive product
High temperature soldering guaranteed:
260 ℃ / 10 seconds at 5 lbs. ( 2.3 Kg )
tension
Small size, simple installation
Leads solderable per MIL-STD-202,
Method 208
.460(11.68)
.420(10.6)
.035(0.9)
.028(0.7)
AC
.5 (12.7)
MIN
.160(4.1)
.140(3.6)
SPACING
.600(15.24)
.560(14.22)
.153(3.9)
.146(3.7)
.050(1.27)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol KBP KBP KBP KBP KBP KBP KBP _Units
201G 202G 203G 204G 205G 206G 207G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current
@TA = 50℃
I(AV)
50 100 200 400 600 800 1000 V
2.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
Load (JEDEC method )
Rating For Fusing (t<8.35ms)
I^2t
60
A
15
A²sec
Maximum Instantaneous Forward Voltage
@ 3.14A
VF
1.2
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃
IR
10
uA
500
uA
Typical Thermal Resistance (Note)
RθJA
RθJL
25
8
℃/W
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.
With 0.47 x 0.47” (12 x 12mm) Copper Pads.
- 718 -