KBL401G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers

Features
KBL401G THRU KBL407G
Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
4.0 Amperes
KBL
a UL Recognized File # E-96005
a Glass passivated junction
a Ideal for printed circuit board
a Reliable low cost construction
a High surge current capability
a High temperature soldering guaranteed:
250+ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs. ( 2.3 Kg ) tension
a Leads solderable per MIL-STD-202,
Method 208
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25+ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage
KBL KBL KBL KBL KBL KBL KBL _Units
401G 402G 403G 404G 405G 406G 407G
50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA = 50+
4.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
150
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 4.0A
Maximum DC Reverse Current @ TA=25+
at Rated DC Blocking Voltage @ TA=125+
1.1
V
10
uA
500
uA
Typical Thermal Resistance (Note) RθJA
RθJL
19
+/W
2.4
Operating Temperature Range TJ
-55 to +150
+
Storage Temperature Range TSTG
-55 to +150
+
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted onP.C.B.
With 0.47 x 0.47” (12 x 12mm) Copper Pads.
- 492 -