KBL401 Datasheet, PDF (1/2 Pages) Surge Components – Single Phase 4.0 AMPS. Silicon Bridge Rectifiers

Features
KBL401 THRU KBL407
Single Phase 4.0 AMPS. Silicon Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
4.0 Amperes
KBL
UL Recognized File # E-96005
Ideal for printed circuit board
Reliable low cost construction
High surge current capability
High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
Leads solderable per MIL-STD-202,
Method 208
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol KBL KBL KBL KBL KBL KBL KBL _Units
401 402 403 404 405 406 407
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@TA = 50℃
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
4.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
200
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 4.0A
V_F
1.1
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=100℃
I_R
10
uA
500
uA
Typical thermal Resistance (Note 1)
RθJA
RθJL
19
2.4
℃/W
Operating Temperature Range
TJ
-55 to +125
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: 1. Thermal Resistance from Junction to Ambient and Junction to Lead with units Mounted on
P.C.B. at 0.375” (9.5mm) Lead Length and 0.6” x 0.6” (16 x 16mm) Copper Pads.
- 672 -