HT11G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 1.0 AMP. Glass Passivated High Efficient Rectifiers

HT11G THRU HT18G
Features
1.0 AMP. Glass Passivated High Efficient Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
TS-1
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Case: Molded plastic TS-1
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260^oC/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
Mounting position: Any
Weight: 0.20 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol HT HT HT HT HT HT HT HT Units
11G 12G 13G 14G 15G 16G 17G 18G
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 300 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 210 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 300 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375 (9.5mm) Lead Length
I_(AV)
1.0
A
@TA = 55℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
30
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
V_F
1.0
1.3
1.7
V
Maximum DC Reverse Current
@ TA=25℃ at Rated DC Blocking Voltage
I_R
@ TA=125℃
5.0
uA
150
uA
Maximum Reverse Recovery Time (Note 1) Trr
50
75
nS
Typical Junction Capacitance (Note 2)
Cj
15
10
pF
Typical Thermal Resistance (Note 3)
RθJA
95
℃/W
Operating Temperature Range
TJ
-65 to +150
℃
Storage Temperature Range
TSTG
-65 to +150
℃
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Mount on cu-Pad Size 5mm x 5mm on PCB.
- 324 -