HER1601PT Datasheet, PDF (1/2 Pages) Won-Top Electronics – 16A HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER

HER1601PT THRU HER1608PT
Features
16.0 AMPS. Glass Passivated High Efficient Rectifiers
Voltage Range
50 to 1000 Volts
Current
16.0 Amperes
TO-3P/TO-247AD
Dual rectifier construction, positive center-tap
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated chip junctions
Superfast recovery time, high voltage
Low forward voltage, high current capability
Low thermal resistance
Low power loss, high efficiency
High temperature soldering guaranteed:
260^oC,.16”(4.06mm)from case for 10 seconds
Mechanical Data
Cases: TO-3P/TO-247AD molded plastic
Terminals: Leads solderable per MIL-STD-750.
Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 10in-lbs. Max.
Weight: 0.2 ounce, 5.6 grams
PIN 1
PIN 3
PIN 2
Positive CT
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol HER HER HER HER HER HER HER HER Units
1601PT 1602PT 1603PT 1604PT 1605PT 1606PT 1607PT 1608PT
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 300 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 210 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current @TC =100℃
V_DC 50 100 200 300 400 600 800 1000 V
I_(AV)
16.0
A
Peak Forward Surge Current, 8.3 ms
Single Half Sine-wave Superimposed on
I_FSM
200
A
Rated Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@8.0A
V_F
1.0
1.3
1.7
V
Maximum DC Reverse Current
@ TC=25℃ at Rated DC Blocking Voltage _IR
@ TC=125℃
10.0
uA
500
uA
Maximum Reverse Recovery Time ( Note 2 )
@TJ=25^oC
Trr
50
Typical Junction Capacitance ( Note 1 )
Cj
85
80
nS
60
pF
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Recover to 0.25A.
- 358 -