HDB101G Datasheet, PDF (1/2 Pages) Micro Commercial Components – 1.0 AMP. Glass Passivated Bridge High Efficient Rectifier 50 to 1000 Volts

HDB(S)101G - HDB(S)107G
1.0 AMP. Glass Passivated
Bridge High Efficient Rectifiers
DB
Features
UL Recognized File # E-96005
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction utilizing molded
plastic technique
High temperature soldering guaranteed:
260^oC / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
Small size, simple installation
Leads solderable per MIL-STD-202, Method
208
High surge current capability
DBS
.047(1.20)
.040(1.02)
.205(5.2)
.195(5.0)
.335(8.51)
.320(8.13) 45⁰
.013(0.33)
.0088(0.22)
.404(10.3)
.386(9.80)
.255(6.5)
.245(6.2)
.130(3.30)
.120(3.05)
.060(1.53)
.040(1.02)
.013(0.33)
.003(0.076)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
HDB HDB HDB HDB HDB HDB HDB
Symbol ^{101G 102G 103G 104G 105G 106G 107G} Units
HDBS HDBS HDBS HDBS HDBS HDBS HDBS
101G 102G 103G 104G 105G 106G 107G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA = 40 ^oC
I_(AV)
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load I_FSM
50
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
V_F
1.0
1.3
1.7
V
Maximum DC Reverse Current @ TA=25 ^oC
at Rated DC Blocking Voltage @ TA=125 ^oC
I_R
Maximum Reverse Recovery Time ( Note 2 ) Trr
5.0
uA
500
uA
50
75
nS
Typical Thermal Resistance ( Note 3 )
R_θJA
R_θJL
40
15
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
Notes:
1. DBS for Surface Mount Package.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
3. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on
P.C.B. with 0.2” x 0.2”” (5 x 5mm) Copper Pads
o_C/W
o_C
o_C
Version: A06