GPAF801 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolation 8.0 AMPS. Glass Passivated Rectifiers

GPAF801 THRU GPAF807
Isolation 8.0 AMPS. Glass Passivated Rectifiers
Voltage Range
50 to 1000 Volts
Current
8.0 Amperes
Features
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
ITO-220AC
.185(4.7)
.173(4.4)
.124(3.16)
. 11 8 ( 3 . 0 0 )
.406(10.3)
.390(9.90)
.134(3.4)DIA
. 11 3(3. 0)D IA
.272(6.9)
.248(6.3)
. 112 (2. 85)
.100(2.55)
.606(15.5)
.583(14.8)
Cases: ITO-220AC molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/ 0.25”,(6.35mm) from case for 10
seconds.
Mounting torque: 5 in – 1bs. max.
Weight: 2.24 grams
.063(1.6)
MAX
.110( 2.8)
.098(2.5)
.161(4.1)
.146(3.7)
.071(1.8)
MAX
.543(13.8)
.512(13.2)
2
PIN 1
PIN 2
Case Positive
.100(2.55)
.100(2.55)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GPAF GPAF GPAF GPAF GPAF GPAF GPAF Units
801 802 803 804 805 806 807
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
@TC = 100℃
V_DC 50 100 200 400 600 800 1000 V
I_(AV)
8.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@8.0A
V_F
1.1
V
Maximum DC Reverse Current @ TC=25℃
at Rated DC Blocking Voltage
I_R
5.0
uA
Typical Junction Capacitance ( Note 1)
Cj
50
pF
Typical Thermal Resistance (Note 2)
RθJC
5.0
℃/W
Operating and Storage Temperature Range T_J ,T_STG
- 65 to + 150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25”
Al-Plate
- 548 -