GPA801 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 8.0 AMPS. Glass Passivated Rectifiers

GPA801 THRU GPA807
8.0 AMPS. Glass Passivated Rectifiers
Voltage Range
50 to 1000 Volts
Current
8.0 Amperes
Features
Low forward voltage drop
High current capability
High reliability
High surge current capability
.113(2.87)
.103(2.62)
TO-220A
.412(10.5)
MAX
DIA
.154(3.91)
.148(3.74)
.27(6.86)
.23(5.84)
.594(15.1)
.587(14.9)
.185(4.70)
.175(4.44)
.055(1.40)
.045(1.14)
Mechanical Data
Cases: TO-220A molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/10 seconds .16”,(4.06mm) from
case.
Weight: 2.24 grams
PIN1
2
.16(4.06)
.14(3.56)
.037(0.94)
.027(0.68)
.56(14.22)
.53(13.46)
.11(2.79)
.10(2.54)
.205(5.20)
.195(4.95)
.025(0.64)
.014(0.35)
PIN 1
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GPA GPA
801 802
GPA
803
GPA
804
GPA
805
GPA
806
GPA Units
807
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
I_(AV)
8.0
A
@TC = 100℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@8.0A
V_F
1.1
V
Maximum DC Reverse Current @ TC=25℃
at Rated DC Blocking Voltage
I_R
Typical Junction Capacitance ( Note 1)
Cj
5.0
uA
50
pF
Typical Thermal Resistance (Note 2)
RθJC
2.5
℃/W
Operating and Storage Temperature Range T_J ,T_STG
- 65 to + 150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25”
Al-Plate
- 546 -