GP20A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

GP20A THRU GP20M
Features
2.0 AMPS. Glass Passivated Junction Plastic Rectifiers
Voltage Range
50 to 1000 Volts
Current
2.0 Amperes
DO-201
High temperature metallurgically bonded construction
Plastic material used carries Underwriters Laboratory
Classification 94V-O
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
2.0 amperes operation at TA=55^oC and with no thermal
runaway
Typical IR less than 0.1 uA
High temperature soldering guaranteed:
350^oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs.
(2.3kg) tension
Mechanical Data
Case: JEDEC DO-201 molded plastic over glass body
Lead: Plated axial leads, solderable per MIL-STD-
750, Method 2026
Polarity: Color band denotes cathode end
Mounting position: Any
Weight: 0.03 ounce, 0.8 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GP GP GP GP GP
20A 20B 20D 20G 20J
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600
Maximum RMS Voltage
V_RMS 35 70 140 280 420
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375” (9.5mm) Lead Length at TA=55℃
V_DC 50 100 200 400 600
I_(AV)
2.0
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC _IFSM
65
method )
Maximum Instantaneous Forward Voltage @2.0A
V_F
1.2
1.1
Maximum Full Load Reverse Current at Rated DC
Blocking Voltage
I_R
5.0
Maximum Full Load Reverse Current, Full Cycle
Average .375”(9.5mm) Lead Length @TA=55℃
Typical Reverse Recovery Time (Note 1)
HTIR
Trr
100
2.5
Typical Junction Capacitance ( Note 2 )
Cj
40.0
Typical Thermal Resistance (Note 3)
Rθ_JA
40
Operating and Storage Temperature Range
TJ,TSTG
- 65 to + 175
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.
GP GP Units
20K 20M
800 1000 V
560 700 V
800 1000 V
A
A
V
uA
uA
uS
pF
℃/W
℃
- 570 -