GP1601_1 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 16.0 AMPS. Glass Passivated Rectifiers

GP1601 - GP1607
16.0 AMPS. Glass Passivated Rectifiers
TO-220AB
Features
Glass passivated chip junction.
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss
Mechanical Data
Cases: TO-220AB molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Pure tin plated, lead free.
solderable per MIL-STD-202, Method 208
guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260 ^oC /10 seconds .16”,(4.06mm) from
case.
Weight: 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{GP GP GP GP GP GP GP} Units
1601 1602 1603 1604 1605 1606 1607
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
I_(AV)
16.0
A
@TC = 100 ^oC
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@8.0A
V_F
1.1
V
Maximum DC Reverse Current @ T_C=25 ^oC
at Rated DC Blocking Voltage @ TC=125 ^oC
I_R
Typical Junction Capacitance ( Note 1)
Cj
10
uA
250
uA
50
pF
Typical Thermal Resistance (Note 2)
R_θJC
1.5
Operating and Storage Temperature Range TJ ,TSTG
- 65 to + 150
Notes:
1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate.
o_C/W
o_C
Version: A06