GP1001 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 10.0 AMPS. Glass Passivated Rectifiers

GP1001 THRU GP1007
Features
10.0 AMPS. Glass Passivated Rectifiers
Voltage Range
50 to 1000 Volts
Current
10.0 Amperes
TO-220
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: TO-220 molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/10 seconds .16”,(4.06mm) from
case.
Weight: 2.24 grams
PIN 1
PIN 3
CASE
Positive CT ^{PIN 2}
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GP GP GP GP GP GP GP Units
1001 1002 1003 1004 1005 1006 1007
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
@TC = 100℃
V_DC 50 100 200 400 600 800 1000 V
I_(AV)
10.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
125
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@5.0A
V_F
1.1
V
Maximum DC Reverse Current @ TC=25℃
at Rated DC Blocking Voltage
I_R
5.0
uA
Typical Junction Capacitance ( Note 1)
Cj
30
pF
Typical Thermal Resistance (Note 2)
RθJC
3.0
℃/W
Operating and Storage Temperature Range T_J ,T_STG
- 65 to + 150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25”
Al-Plate
- 550 -