FRF1601G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolation 16.0 AMPS. Glass Passivated Fast Recovery Rectifiers

FRF1601G THRU FRF1607G
Features
Isolation 16.0 AMPS. Glass Passivated Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
16.0 Amperes
ITO-220AB
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
.134(3.4)DIA
.11 3 ( 3 .0 )D I A
.272(6.9)
.248(6.3)
.112 (2 .85 )
.100(2.55)
.606(15.5)
.583(14.8)
Cases: ITO-220AB molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/10 seconds 0.25”,(6.35mm) from
case.
Mounting position: Any
Weight: 2.24 grams
Mounting torque: 5 in – 1bs. max.
. 11 0 (2 .8 )
.098(2.5)
.543(13.8)
.512(13.2)
PIN 1
PIN 3
PIN 2
Positive CT
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FRF FRF FRF FRF FRF FRF FRF Units
1601G 1602G 1603G 1604G 1605G 1606G 1607G
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
See Fig. 1
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
16.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 8.0A
V_F
1.3
V
Maximum DC Reverse Current @ TC=25℃
at Rated DC Blocking Voltage @ TC=125℃
I_R
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 1) Trr
150
250 500
nS
Typical Thermal Resistance (Note 2)
RθJC
5.0
℃/W
Operating and Storage Temperature Range T_J ,T_STG
-65 to +150
℃
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink size 2” x
3” x 0.25” Al-Plate
- 470 -