FRF1001G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolation 10 AMPS. Glass Passivated Fast Recovery Rectifiers

FRF1001G THRU FRF1007G
Features
Isolation 10 AMPS. Glass Passivated Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
10 Amperes
ITO-220AB
a Low forward voltage drop
a High current capability
a High reliability
a High surge current capability
Mechanical Data
.185(4.7)
.173(4.4)
.124(3.16)
. 11 8 ( 3 . 0 )
.406(10.3)
.390(9.90)
.134(3.4)DIA
.113(3.0)DIA
.272(6.9)
.248(6.3)
.112(2.85)
.100(2.55)
.606(15.5)
.583(14.8)
a Cases: ITO-220AB molded plastic
a Epoxy: UL 94V-0 rate flame retardant
a Terminals: Leads solderable per
MIL-STD-202, Method 208 guaranteed
a Polarity: As marked
a High temperature soldering guaranteed:
260+/10 seconds 0.25”,(6.35mm) from
.110(2.8)
.098(2.5)
.030(0.76)
.020(0.50)
.055(1.4)
.043(1.1)
.035(0.9)
.020(0.5)
.161(4.1)
.146(3.7)
.543(13.8)
.512(13.2)
case.
a Mounting position: Any
a Weight: 2.24 grams
a Mounting torque: 5 in – 1bs. max.
PIN 1
PIN 3
PIN 2
Positive CT
.106(2.7)
.094(2.4)
.106(2.7)
.094(2.4)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25+ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FRF FRF FRF FRF FRF FRF FRF Units
1001G 1002G 1003G 1004G 1005G 1006G 1007G
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current _I(AV)
10
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
125
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 5.0A
V_F
1.3
V
Maximum DC Reverse Current @ TC=25+
at Rated DC Blocking Voltage @ TC=125+
I_R
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 1) Trr
150
250 150
nS
Typical Thermal Resistance (Note 2)
RθJC
5.0
+/W
Operating and Storage Temperature Range TJ ,TSTG
-65 to +150
+
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink size 2" x
3" x 0.25" Al-Plate
- 408 -