FRAF1001G_1 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolated 10 AMPS. Glass Passivated Fast Recovery Rectifiers

FRAF1001G - FRAF1007G
Isolated 10 AMPS. Glass Passivated
Fast Recovery Rectifiers
ITO-220AC
.185(4.7)
.173(4.4)
.124(3.16)
.118(3.00)
.406(10.3)
.390(9.90)
.134(3.4)DIA
.113(3.0)DIA
.112(2.85)
.100(2.55)
Features
Glass passivated chip junction.
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss
Mechanical Data
.272(6.9)
.248(6.3)
.063(1.6)
MAX
.110(2.8)
.098(2.5)
.030(0.76)
.020(0.50)
.055(1.4)
.043(1.1)
.035(0.9)
.020(0.5)
.606(15.5)
.583(14.8)
.161(4.1)
.146(3.7)
.071(1.8) .543(13.8)
MAX
.512(13.2)
2
Cases: ITO-220AC molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Pure tin plated, Lead free. Leads
solderable per MIL-STD-202, Method 208
guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260 ^oC /10 seconds 0.25”,(6.35mm) from
case.
Mounting position: Any
Weight: 2.24 grams
Mounting torque: 5 in – 1bs. max.
.100(2.55)
PIN 1
.100(2.55)
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{FRAF FRAF FRAF FRAF FRAF FRAF} FRAF Units
1001G 1002G 1003G 1004G 1005G 1006G 1007G
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TC = 55 ^oC
I_(AV)
10
A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method )
I_FSM
150
A
Maximum Instantaneous Forward Voltage @ 10A
V_F
Maximum DC Reverse Current @ TC=25 ^oC
at Rated DC Blocking Voltage @ TC=125 ^oC
I_R
1.3
V
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 2 )
Trr
150
250
500
nS
Typical Junction Capacitance ( Note 1 ) TJ=25 ^oC
Cj
60
Typical Thermal Resistance (Note 3)
R_θJC
5.0
Operating and Storage Temperature Range
TJ ,TSTG
-65 to +150
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
3. Thermal Resistance from Junction to Case, with Heatsink size 2” x 3” x 0.25” Al-Plate.
pF
o_C/W
o_C
Version: A06