FRA1601G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 16.0 AMPS. Glass Passivated Fast Recovery Rectifiers

FRA1601G THRU FRA1607G
Features
16.0 AMPS. Glass Passivated Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
16.0 Amperes
TO-220A
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/10 seconds .16”,(4.06mm) from
case.
Mounting position: Any
Weight: 2.24 grams
.113(2.87)
.103(2.62)
.412(10.5)
MAX
DIA
.154(3.91)
.148(3.74)
.27(6.86)
.23(5.84)
.594(15.1)
.587(14.9)
.185(4.70)
.175(4.44)
.055(1.40)
.045(1.14)
PIN1
2
.16(4.06)
.14(3.56)
.037(0.94)
.027(0.68)
.56(14.22)
.53(13.46)
.11(2.79)
.10(2.54)
.205(5.20)
.195(4.95)
.025(0.64)
.014(0.35)
PIN 1
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FRA FRA FRA FRA FRA FRA FRA Units
1601G 1602G 1603G 1604G 1605G 1606G 1607G
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
See Fig. 2
V_RRM
V_RMS
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
16.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
250
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 16.0A
V_F
1.3
V
Maximum DC Reverse Current @ TC=25℃
at Rated DC Blocking Voltage @ TC=125℃
I_R
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 1) Trr
150
250
500
nS
Typical Thermal resistance (Note 2)
RθJC
Operating and Storage Temperature Range T_J ,T_STG
2.5
-65 to +150
℃/W
℃
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink size 2” x
3” x 0.25” Al-Plate
- 464 -