FRA1001G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 10 AMPS. Glass Passivated Fast Recovery Rectifiers

FRA1001G THRU FRA1007G
Features
10 AMPS. Glass Passivated Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
10 Amperes
TO-220A
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: ITO-220AC molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/10 seconds .16”,(4.06mm) from
case.
Mounting position: Any
Weight: 2.24 grams
.113(2.87)
.103(2.62)
.412(10.5)
MAX
DIA
.154(3.91)
.148(3.74)
.27(6.86)
.23(5.84)
.594(15.1)
.587(14.9)
.185(4.70)
.175(4.44)
.055(1.40)
.045(1.14)
PIN1
2
.16(4.06)
.14(3.56)
.037(0.94)
.027(0.68)
.56(14.22)
.53(13.46)
.11(2.79)
.10(2.54)
.205(5.20)
.195(4.95)
.025(0.64)
.014(0.35)
PIN 1
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FRA FRA FRA FRA FRA FRA FRA Units
1001G 1002G 1003G 1004G 1005G 1006G 1007G
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@TC = 55℃
V_DC 50 100 200 400 600 800 1000 V
I_(AV)
10
A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC _IFSM
150
A
method )
Maximum Instantaneous Forward Voltage @ 10A
V_F
Maximum DC Reverse Current @ TC=25℃
at Rated DC Blocking Voltage @ TC=125℃
I_R
1.3
V
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 2 )
Trr
150
250
500
nS
Typical Junction Capacitance ( Note 1 ) TJ=25℃
Cj
100
pF
Typical Thermal Resistance (Note 3)
RθJC
3.0
℃/W
Operating and Storage Temperature Range
TJ ,TSTG
-65 to +150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4..0 Volts D.C.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
3. Thermal Resistance from Junction to Case, with Heatsink size 2” x 3” x 0.25” Al-Plate
- 456 -