FR1601G_09 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 16.0 AMPs. Glass Passivated Fast Recovery Rectifiers

Pb RoHS
COMPLIANCE
Features
Glass passivated chip junction.
High efficiency, Low VF
High Current capability
High reliability
High Surge current capability
Low power loss
For use in low voltage , high frequency inventor,
free wheeling and polarity portection application
Green compound with suffix "G" on packing code
& prefix "G" on datecode.
FR1601G - FR1607G
16.0 AMPs. Glass Passivated Fast Recovery Rectifiers
TO-220AB
Mechanical Data
Cases: TO-220AB Molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminal : Pure tin plated, lead free, solderable
per MIL-STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260^oC/10 seconds .16"(4.06mm) from case.
Weight: 2.24 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
FR
1601G
FR
1602G
Maximum Recurrent Peak Reverse Voltage
VRRM 50 100
FR
1603G
200
FR
1604G
400
FR
1605G
600
FR
1606G
800
FR
1607G
1000
Units
V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified @Tc = 105℃
I(AV)
16.0
A
Peak Forward Surge Current, 8.3 ms Single Half Sine-
wave Superimposed on Rated Load (JEDEC method ) ^IFSM
150
A
Maximum Instantaneous Forward Voltage @ 8.0A
VF
1.3
V
Maximum DC Reverse Current @ T_A=25℃
at Rated DC Blocking Voltage @ TA=125℃
IR
5.0
100
uA
Typical Junction Capacitance (Note 1)
Cj
60
pF
Typical Reverse Recovery Time (Note 2)
TRR
150
250
500
nS
Typical Thermal Resistance (Note 3)
RθJC
3.0
O_C/W
Operating Temperature Range
TJ
-65 to +150
O_C
Storage Temperature Range
TSTG
-65 to +150
O_C
Note 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
2. Reverse rRecovery Time Condition : IF=0.5A, IR=1.0A, IRR=0.25A
3. Mount on P.C. Board with 2"x3"x0.25" Al plate
Page :1 of 2
Version : C09