FR1001G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolation 10 AMPS. Glass Passivated Fast Recovery Rectifiers

FR1001G THRU FR1007G
Features
Isolation 10 AMPS. Glass Passivated Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
10 Amperes
TO-220
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: TO-220 molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Leads solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260℃/10 seconds .16”,(4.06mm) from
case.
Mounting position: Any
PIN 1
PIN 3
CASE
Positive CT ^{PIN 2}
Weight: 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FR FR FR FR FR FR FR Units
1001G 1002G 1003G 1004G 1005G 1006G 1007G
Maximum Recurrent Peak Reverse Voltage _VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current _I(AV)
10
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load I_FSM
125
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 5.0A
V_F
1.3
V
Maximum DC Reverse Current @ TC=25℃
I_R
at Rated DC Blocking Voltage @ TC=125℃
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 1)
Typical Thermal Resistance (Note 2)
Trr
RθJC
150
250 500
nS
3.0
℃/W
Operating and Storage Temperature Range TJ ,TSTG
-65 to +150
℃
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink size 2" x
3" x 0.25" Al-Plate
- 406 -