F1T1_1 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 1.0 AMP. Fast Recovery Rectifiers

F1T1 - F1T7
1.0 AMP. Fast Recovery Rectifiers
TS-1
Features
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss.
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Pure tin plated, Lead free., solderable
per MIL-STD-202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260 ^oC /10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
Weight: 0.20 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol F1T1 F1T2 F1T3 F1T4 F1T5 F1T6 F1T7 Units
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
I(AV)
1.0
A
@TA = 55 ^oC
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated IFSM
30
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
Maximum DC Reverse Current @ TA=25 ^oC
at Rated DC Blocking Voltage @ TA=125 ^oC
IR
Maximum Reverse Recovery Time ( Note 1 ) Trr
1.2
V
5.0
uA
150
uA
150
250
500
nS
Typical Junction Capacitance ( Note 2 )
Cj
10
Typical Thermal Resistance
Operating Temperature Range
R_θJA
TJ
100
-65 to +150
Storage Temperature Range
TSTG
-65 to +150
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
pF
o_{C /W}
o_C
o_C
Version: A06