|
F1T1 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 1.0 AMP. Fast Recovery Rectifiers | |||
|
F1T1 THRU F1T7
Features
1.0 AMP. Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
TS-1
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Axial leads, solderable per MIL-
STD-202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260â/10 seconds/.375â,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
Weight: 0.20 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25âambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol F1T1 F1T2 F1T3 F1T4 F1T5 F1T6 F1T7 Units
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current
.375â(9.5mm) Lead Length @TA = 55â
I(AV)
50 100 200 400 600 800 1000 V
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
30
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
1.2
V
Maximum DC Reverse Current @ TA=25â
at Rated DC Blocking Voltage @ TA=100â
IR
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 1 ) Trr
150
250
500
nS
Typical Junction Capacitance ( Note 2 )
Typical Thermal Resistance ( Note 3 )
Cj
RθJA
10
pF
100
OC/W
Operating Temperature Range
TJ
-65 to +150
â
Storage Temperature Range
TSTG
-65 to +150
â
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
- 392 -
|
▷ |