ES2A Datasheet, PDF (1/2 Pages) Jinan Gude Electronic Device – 2.0AMP. SUPER FAST RECOVRY SILICON RECTIFIERS

ES2A - ES2J
2.0 AMPS. Surface Mount Super Fast Rectifiers
SMB/DO-214AA
Features
.083(2.10)
.077(1.95)
.147(3.73)
.137(3.48)
Glass passivated junction chip
For surface mounted application
Low profile package
Built-in strain relief
Ideal for automated placement
Easy pick and place
Superfast recovery time for high efficiency
Glass passivated chip junction
High temperature soldering:
260^OC/10 seconds at terminals
Plastic material used carries Underwriters
Laboratory Classification 94V-0
Mechanical Data
.103(2.61)
.078(1.99)
.056(1.41)
.035(0.90)
.187(4.75)
.167(4.25)
.012(.31)
.006(.15)
.008(.20)
.004(.10)
.209(5.30)
.201(5.10)
.012(.31)
.006(.15)
Cases: Molded plastic
Terminals: Pure tin plated, lead free.
Polarity: Indicated by cathode band
Packing: 12mm tape per EIA STD RS-481
Weight: 0.093 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^OC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ES ES ES ES ES ES ES ES Units
2A 2B 2C 2D 2F 2G 2H 2J
Maximum Recurrent Peak Reverse
Voltage
V_RRM ^{50 100 150 200 300 400 500 600 V}
Maximum RMS Voltage
V_RMS ^{35 70 105 140 210 280 350 420 V}
Maximum DC Blocking Voltage
V_DC
50 100 150 200 300 400 500 600 V
Maximum Average Forward Rectified
Current See Fig. 1
I_(AV)
2.0
A
Peak Forward Surge Current, 8.3 ms
Single Half Sine-wave Superimposed on
I_FSM
50
A
Rated Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 2.0A
V_F
0.95
1.3
1.7
V
Maximum DC Reverse Current
@TA =25^oC at Rated DC Blocking Voltage
@ TA=100 ^oC
I_R
10
uA
350
uA
Maximum Reverse Recovery Time
( Note 1 )
Trr
35
nS
Typical Junction Capacitance ( Note 2 )
Cj
25
20
pF
Maximum Thermal Resistance (Note 3)
R_θJA
75
R_θJL
20
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied VR=4.0 Volts
3. Units Mounted on P.C.B. 0.4” x 0.4” (10mm x 10mm) Pad Areas
o_{C /W}
o_C
o_C
Version: A06